No products in the cart.
Roll over image to zoom in
Click to open expanded view
MERCURY ELITE 1KVA
Built-in AVR to withstand voltage fluctuation
Wide input voltage range
Overload protection & Short circuit protection
Battery deep discharge protection & overcharge protection
Green function (No load cut off)
Compatible with generators
Extended powerbackup and durability
For a UPS that can be trusted for performance, reliability and durability, the Mercury UPS brand is one of the top choices. The Mercury Elite 1000 Pro Line Interactive UPS is suitable for office and domestic IT equipment and electronics.
The total output rating of the Mercury Elite 1000 is 600 watts. Check the full technical specifications, below.
Input voltage: 220VAC
Input frequency: 50Hz
Input phase: Single phase
Input socket With Fuse
Cold Start (0 to 100% load): Press the ON/OFF switch
Input range (220V): 140-300
Rating output (VA): 1000VA
Rating output (W): 600W
Waveform: Battery mode(simulated sine wave),AC mode(sine wave)
Power factor: 0.6
Rating voltage: 220V
Output range: 220Vac-7% to +15% in battery mode
Rear Output Socket: 4 x Universal Battery backup
Transfer time: TYPICAL4-8ms
Communication Interface: optional RS232/RJ11
Rating frequency: 50Hz
Line-mode: Synchronize with the Utility
Battery mode: 50 Hz±1Hz
Line Mode: FUSE& firmware protection
Battery Mode: Software protection controlled by firmware
Line Mode: 110%±5%; Go to fault mode after 5 minutes, 120%±5%; Go to fault mode immediately.
Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
Rating: 2 X 12V/7.5AH (Actual rating 7AH)
Backup time Typical: 20 to 30 mins (depending on load)
Charge current: About 1A at normal mode.
Over charge protection: 29V±0.2V stop charging, 27.4+/-0.2V recharge
Weight 8.6+/-0.3 Kg
Dimensions per unit packaging: 395x205x258mm
Packsize per Master carton: 2
Dimensions per Master carton 410x430x273mm
- Store Name: Computer Ventures
- Vendor: Large Mike
- No ratings found yet!