No products in the cart.
Roll over image to zoom in
Click to open expanded view
Leelbox Wireless Router Wireless Signal Amplification Repeater
- 【 WPS-key encryption】 protect data security, flood prevention network,Another highlight of the WN522N2 is the WPS-key encryption function. When used with a wireless router (or network card) with QSS/WPS function, you can establish a WPA2 level that is more secure than traditional WEP encryption by pressing the FQSS/WPS button at the same time. The wireless security connection protects the security of data transmission while also preventing others from smashing the network.
- 【Advantage】 Fast speed, high efficiency, the engineering ABS+PC material used in the shell, resistant to falling, mini portable belt, easy to operate!
- 【Relay and AP work modes】 Mobile phone / tablet / computer can be set, just set once, all wireless devices can be used;
- 【Support WPA2, WPA and WEP9 (128/64)】
- 【Package Accessories】 WIFI Wireless Repeater x1; English Manual x 1; RJ45 Cable x 1
WHAT IN THE BOX
- 1* WIFI Wireless Repeater;
- 1* English Manual;
- 1* RJ45 Cable
Wifi Repeater J01
Size (L x W x H cm)
11.8 x 6.8 x 17.8 cm
Wifi signal amplifier, fast speed, high efficiency, the engineering ABS+PC material used in the shell, resistant to falling, mini portable belt, easy to operate!
Two working modes of the repeater:
Relay mode: Wireless to wireless: After receiving the wireless signal from the wireless router, the repeater retransmits the new wireless signal to achieve the effect of enlarging and extending the coverage. Compatible with all wireless routers (need to know the username and password of the wireless signal), the setup is very simple. The product comes with instructions. Mobile phones, computers, and tablets can be set up, and only need to be set once for all wireless devices.
AP mode: Wired to wireless: After the network cable is connected to the computer, you can directly access the Internet without dialing. For example, hotels, apartments, rental houses, offices, and broadband sharing with neighbors, you only need to plug the network cable that has been connected to the repeater. Network port, you can turn the cable to wireless use. Plug and Play does not need to be set.
1. Relay and AP work modes, mobile phone / tablet / computer can be set, just set once, all wireless devices can be used;
2. Wireless standard IEEE802.11 b/g/n
3. Transmission frequency: 2.4GHz~2.4835GHz
4. Support WPA2, WPA and WEP9 (128/64)
5. Simple setup wizard software interface
6.WPS one-key encryption, effective flood control network
Package weight: 198g
Carton Size: 118x68x178mm
WIFI wireless repeater x1
English manual x 1
RJ45 cable x 1
Instructions for use:
A: Configuring wireless repeater with wireless
1: Plug the wireless repeater into a power outlet.
2: Click the network link icon (or) in the lower right corner of your computer screen. You will receive the wireless signal from the wireless repeater (WIFI-Repeater) and click the connect button to connect to the wireless repeater.
3: Open IE browser, enter http://192.168.10.1 in the address bar of the browser, press Enter to enter the setting page.
4: Select the language in the login screen of the settings, then enter “account” and “password”, click the login button to log in. The default account and password is “admin”.
5: After logging in, you will see a page showing the setup wizard. Click “Relay Mode” to set it.
6: Select the wireless network you want to relay.
7: Enter the name and password of the relay network, click the confirmation button, the wireless repeater will restart, wait about 2 minutes, the repeater is started, and the repeater can be reconnected. (Relay Network Name: Wifi-Repeater) Note: The password must match the wireless network password you want to relay.
B: Configure the wireless repeater with cable
1: Plug the wireless repeater into a power outlet and connect the repeater to the computer with a network cable.
C: Configure wireless AP mode
1: Plug the wireless repeater into a power outlet.
2: Open IE browser, enter http://192.168.10.1 in the address bar of the browser, press Enter to enter the setting page.
3: Select the language in the login screen of the settings, then enter “account” and “password”, click the login button to log in. The default account and password is “admin”.
4: Click AP mode to set.
5: Set according to the displayed page information (SSID: Name of the wireless network Channel: Wireless channel of the wireless network Encryption algorithm: Select the encryption method you want, the supported encryption methods are: WEP, WPA PSK, WPA2 PSK, WPA /WPA2 PSK Password: Enter the wireless password you want to set.
6: Click the confirmation button, the wireless repeater will restart, wait for about 2 minutes, the repeater is started, and the repeater can be reconnected.
D: computer, tablet, etc. are connected to the repeater
1: Start the computer, right click on the network connection icon (or) to open the wireless network connection interface.
2: Select the network of the wireless repeater you want to connect from the list of wireless networks, click the connection icon to connect according to the windows prompt.
3: After the connection is successful, you will see the icon for successful network connection in the lower right corner of the computer.
Change the login password of the account: The default login password of the wireless repeater is “admin”. If you need to change the login password, first log in to the 192.168.10.1 page, click “Manage” – “Login Management”, in the dialog box on the right. Enter the new username and password, click the OK button, the repeater will return to the login page and the settings will take effect.
- Store Name: Michael
- Vendor: mikky
- Address: Suit 205 Jinifa Plaza, Central Business District
- No ratings found yet!